噴嘴，噴頭，水嘴國標標準參照表

發布時間：2012-11-09 11:02瀏覽次數：

編號	中文名稱	英文名稱
GB 18145-2003	陶瓷片密封水嘴	Ceramic cartridge faucets
GB/T 8375-1987	水嘴分類、型號命名方法	Classification and type nomenclature for taps
ANSI/ASAE S436.1-1997	裝有噴霧器和噴嘴的中心旋轉軸、彎頭旋轉軸和橫向移動的灌溉機噴水均勻性測定試驗程序	Test Procedure for Determining the Uniformity of Water Distribution of Center Pivot, Corner Pivot, and Moving Lateral Irrigation Machines Equipped with Spray or Sprinkler Nozzles
ANSI/ASME MFC-3M-1-2004	用孔板、噴嘴和文杜利流量計測量管道中液體流量.第1部分:總則	Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 1-General
ANSI/ASME MFC-3M-2-2004	用孔板、噴嘴和文杜利流量計測量管道中液體流量.第2部分:孔板	Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 2-Orifice Plates
ANSI/ASME MFC-3M-3-2004	用孔板、噴嘴和文杜利流量計測量管道中液體流量.第3部分:噴嘴和文杜利噴嘴	Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 3 - Nozzles and Venturi Nozzles
ANSI/ASME MFC-3M-4-2004	用孔板、噴嘴和文杜利流量計測量管道中液體流量.第4部分:文杜利流量計	Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Part 4 - Venturi Meters
ANSI/ASME MFC-7M-1987	利用臨界文氏流量噴嘴測量氣體流量	Gas Flow by Means of Critical Flow Venturi Nozzles, Measurement of
ANSI/ASTM F1601-2001	中央真空吸塵系統家用電動管嘴馬達壽命評估試驗方法	Test Method for Motor Life Evaluation of a Household Electric Motorized Nozzle for Central Vacuum Cleaning System
ANSI/ASTM F1692-2001	家庭中央真空吸塵系統渦輪動力噴嘴壽命評估試驗方法	Test Method for Life Evaluation of aTurbine Powered Nozzle for Household Central Vacuum Cleaning Systems
ANSI/AWS C4.5M-2006	氧化燃料噴嘴的統一命名系統	Uniform Designation System for Oxyfuel Nozzles
ANSI/AWWA C708-2005	多噴嘴式冷水表	Cold-Water Meters - Multijet Type
ANSI/HI 9.6.2-2001	離心泵和立式泵.好大噴嘴負荷	Centrifugal and Vertical Pumps for Allowable Nozzle Loads
ANSI/NFPA 1962-2003	消防水龍帶包括接頭和噴嘴的保養、使用和維修試驗	Care, Use, and Service Testing of Fire Hose, Including Couplings and Nozzles
ANSI/NFPA 1964-2003	噴嘴(關閉閥和端頭)	Spray Nozzles (Shutoff and Tip)
ANSI/UL 2167-2004	消防設備用水霧噴嘴的安全標準	Standard for Safety for Water Mist Nozzles for Fire-Protection Service
ANSI/UL 2351-2004	防火用噴嘴的安全標準	Standard for Safety for Spray Nozzles for Fire-Protection Service
ANSI/UL 401-2004	防火服務用便攜式噴霧軟管噴嘴的安全標準	Standard for Safety for Portable Spray Hose Nozzles for Fire-Protection Service (bulletin dated February 16, 2004)
ASME MFC-7M-1987	用大限流量文氏噴嘴測量氣體流量	(Measurement of gas flow by means of critical flow Venturi nozzles)
ASTM C 605-1992	耐火粘土制噴嘴和套管的二次加熱變化的試驗方法	Test Method for Reheat Change of Fireclay Nozzles and Sleeves
ASTM E 641-2001	農用液壓噴嘴的試驗的標準方法	Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
ASTM F 1413-1992	漏油分散設備:起重臂和噴油嘴系統	Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
ASTM F 1460-1993	溢油分散劑噴灑設備噴桿和噴嘴系統校準的標準規范	Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
BS 1486-1-1959	潤滑脂管嘴.第1部分:機械與車輛用潤滑脂管嘴和適配器	Lubricating nipples - Lubricating nipples and adaptors for use on machinery and vehicles
BS 1486-2-1961	潤滑脂管嘴.重型潤滑脂管嘴	Lubricating nipples - Heavy duty lubricating nipples
BS 1486-4-1981	潤滑脂管嘴規范.第4部分:液壓潤滑脂管嘴規范	Lubricating nipples - Specification for hydraulic grease nipples
BS 2C 13-1988	飛機重力灌注燃油口及相關供燃油嘴的尺寸規范(米制系列)	Specification for sizes of aircraft gravity filling orifices and associated replenishment nozzles (metric series)
BS 5041-1-1987	消防栓系統設備.第1部分:濕式水嘴接地閥規范	Fire hydrant systems equipment - Specification for landing valves for wet risers
BS 5041-2-1987	消防栓系統設備.第2部分:干式水嘴接地閥規范	Fire hydrant systems equipment - Specification for landing valves for dry risers
BS 5041-4-1975	消防栓系統設備.第4部分:干式水嘴用接地閥箱規范	Fire hydrant systems equipment - Specification for boxes for landing valves for dry risers
BS 5041-5-1974	消防栓系統設備.第5部分:泡沫入口及干式水嘴用箱規范	Fire hydrant systems equipment - Specification for boxes for foam inlets and dry riser inlets
BS 6356-1-1997	農作物防護用噴霧設備.第1部分:噴嘴試驗方法	Spraying equipment for crop protection - Method of test for sprayer nozzles
BS 6356-13-1997	農作物保護噴霧設備.第13部分:氣動噴霧器:噴嘴旋軸螺母尺寸	Spraying equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts
BS 6356-2-1985	農作物防護用噴霧設備.第2部分:噴嘴與壓力計連接尺寸規范	Spraying equipment for crop protection - Specification for connecting dimensions for nozzles and manometers
BS 6356-4-1989	農作物保護用噴霧設備.第4部分:田間噴嘴性能大限規范	Spraying equipment for crop protection - Specification for performance limits for field spraying nozzles
BS 6356-6-1992	農作物保護用噴霧設備.第6部分:帶插接固定裝置噴嘴連接尺寸規范	Spraying equipment for crop protection - Specification for connecting dimensions for nozzles with bayonet fixing
BS 6913-13-1997	運土機械的操作和維修.潤滑油配件規范.油嘴類型	Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Nipple type
BS 6913-14-1997	運土機械的操作和維修.潤滑油配件規范.注油搶噴嘴	Operation and maintenance of earth-moving machinery - Specification for lubrication fittings - Grease-gun nozzles
BS EN 12067-1-1999	燃氣噴嘴和燃氣裝置用燃氣/空氣混合調節器.第1部分:氣動結構類型	Gas/air ratio controls for gas burners and gas burning appliances - Pneumatic types
BS EN 12094-7-2001	固定消防系統.氣體滅火系統元件.CO2系統用噴嘴的要求和試驗方法	Fixed firefighting systems - Components for gas extinguishing systems - Requirements and test methods for nozzles for CO2 systems
BS EN 13079-2003	防飲用水回流造成污染的設備.有噴嘴的氣隙.A類.D型	Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A. Type D
BS EN 13760-2003	輕型和重型車輛用機動車液化石油氣填充系統.噴油嘴試驗要求和尺寸	Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
BS EN 293-1992	油壓力霧化噴嘴.好低要求.試驗	Specification for oil pressure atomizing nozzles - Minimum requirements - Testing
BS EN 299-1999	油壓霧化噴嘴.角度和噴射特性的測定	Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
BS EN 303-6-2000	供暖鍋爐.帶強制通風燃燒嘴器的供暖鍋爐.標稱熱輸入量不超過70kw的用霧化油燃燒爐的組合式鍋爐的家用熱水供	Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
BS EN 303-6-2000	供暖鍋爐.帶強制通風燃燒嘴器的供暖鍋爐.標稱熱輸入量不超過70kw的用霧化油燃燒爐的組合式鍋爐的家用熱水供	Heating boilers - Heating boilers with forced draught burners - Specific requirements for the domestic hot water operation of combination boilers with atomizing oil burners of nominal heat input not exceeding 70 kW
BS EN 625-1996	裝有常壓送風噴嘴的燃氣集中供暖鍋爐.公稱熱輸入量不超過70kW的混合鍋爐的家庭熱水供暖的具體要求	Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW
BS EN ISO 11545-2001	農業灌溉設備.有噴嘴或噴霧咀的橫向移動排灌機械和中心軸.水分配均勻性的測定	Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution
BS EN ISO 15029-1-2000	石油和相關產品.耐火液體噴射點燃特性的測定.噴射火焰持久性.空心錐形噴嘴法	Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Spray flame persistence - Hollow-cone nozzle method
BS EN ISO 20844-2004	石油和相關產品.使用柴油注射器噴嘴測定含聚合物油的剪切穩定性	Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
BS EN ISO 5167-3-2003	用插入圓截面管道中的壓差裝置測量流體流量.噴嘴和文杜利噴嘴	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Nozzles and Venturi nozzles
BS EN ISO 9300-2005	用臨界流量文丘里噴嘴測定氣體流量	Measurement of gas flow by means of critical flow Venturi nozzles
BS G 175-1959	航空用燃油嘴接地插頭和插座	Aircraft fuel nozzle grounding plugs and sockets
BS ISO 14681-1998	柴油發動機.燃料噴射泵試驗.燃料噴嘴的校準	Diesel engines - Fuel injection pump testing - Calibrating fuel injectors
BS ISO 2697-2000	柴油發動機.燃料噴嘴."S"尺寸	Diesel engines - Fuel nozzles - Size "S"
BS ISO 4010-1998	柴油發動機.針栓型滯后校準噴嘴	Diesel engines - Calibrating nozzle, delay pintle type
BS ISO 7026-1998	柴油發動機.S1規格B型針栓式噴嘴的20、21、21.1和27型擰入式噴嘴固定器	Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size 'S1' type 'B'
BS ISO 9102-1998	柴油發動機.24、25、26和26.1型擰入式噴嘴底座	Diesel engines - Screw-in injection nozzle holders types 24, 25, 26 and 26.1
BS ISO TR 15377-1998	用壓差裝置測量流體流量.ISO 5167-1規定范圍之外的噴嘴和節流孔板規范指南	Measurement of fluid flow by means of pressure differential devices - Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1
DD ENV 1259-1-1994	燃氣式單噴嘴裝于大大部的幅射管加熱器和非家用燃氣式裝于大大部的發光幅射加熱器.制定合理使用能源的要求和試	Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method A
DD ENV 1259-2-1997	燃氣式單噴嘴裝于大大部的幅射管加熱器和非家用燃氣式裝于大大部的發光幅射加熱器.建立合理使用能源的要求和試	Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method B
DD ENV 1259-3-1997	燃氣式單噴嘴裝于大大部的輻射管加熱器和非家用燃氣式裝于大大部的發光輻射加熱器.建立合理使用能源的要求和試	Single burner gas fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters. Requirements and test methods for establishing the rational use of energy. Radiometric method C
DIN 11210-1982	農業機械.帶式噴霧器.噴嘴支架的連接尺寸	Agricultural machinery; band sprayer; connection dimensions for nozzleholders
DIN 11215-1978	農業機械.農作物保護噴霧器.噴嘴的連接尺寸	Agricultural machinery; sprayers for crop protection, connection dimensions for nozzles
DIN 12898-1992	實驗室用水管龍頭.出水嘴	Laboratory taps; outlet nozzles
DIN 14200-1979	噴嘴排放	Nozzle discharge
DIN 14494-1979	開式噴嘴固定式噴水系統	Water spray systems, fixed, with open nozzles
DIN 16966-4-1982	玻璃纖維增強聚酯樹脂管(UP-GF)管件和接頭.三通噴管嘴尺寸	Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions
DIN 20033-1990	軟管連接件.帶壓緊螺母的錐形管嘴	Hose fittings; tapered nozzle with clamping nut
DIN 20035-1990	軟管管接頭.法蘭管嘴.公稱壓力16	Hose fittings; flange nozzle; nominal pressure 16
DIN 20038-1990	軟管管接頭.接頭管嘴	Hose fittings; coupling nozzles
DIN 24375-1981	表面處理.無氣噴槍的扁形噴嘴.尺寸、測試、標記	Surface treatment; flat-stream nozzles for airless spray guns; dimensions, testing, marking
DIN 25480-1-1987	污染防護箱用元件.噴嘴、遠距離操作鉗用環.窗和支柱系統	Components for contamination protection boxes; nozzles, rings for remote handling tongs, windows and posting systems
DIN 28025-2003	不銹鋼噴嘴.PN 10 至 PN 40	Nozzles of stainless steel - PN 10 to PN 40
DIN 28115-2003	碳鋼噴嘴.PN 10 至 PN 40	Carbon steel nozzles - PN 10 to PN 40
DIN 28136-11-1989	攪拌器.第11部分:玻璃纖維襯里的 CE 型公稱容量為 4000 升更換用剛制攪拌器大大蓋噴嘴的位置和尺寸	Agitator vessels; position and sizes of cover nozzles for glass lined steel agitator vessels, type CE, with a nominal volume of 4000 litres for replacement purposes
DIN 28136-14-1999	攪拌容器.第14部分:BE型d1=2400-3600mm的搪玻璃鋼攪拌容器用蓋噴嘴的位置和大小, CE型d1=2400-3600mm的搪	Agitator vessels - Part 14: Position and sizes of cover nozzles for glass lined steel agitator vessels, position H for vessels form BE with d<(Index)1> = 2400 mm to 3600 mm and position K for vessels form CE with d<(Index)1> = 2400 mm to 3600 mm; inactive for new design
DIN 28136-2-2005	攪拌容器.第2部分:非合金和不銹鋼容器大大蓋噴嘴的位置和尺寸	Agitator vessels - Part 2: Positions and sizes of cover nozzles in non-alloy and stainless steel vessels
DIN 28136-3-2005	攪拌容器.第3部分:搪玻璃鋼件攪拌容器大大蓋噴嘴的位置和尺寸	Agitator vessels - Part 3: Position and sizes of cover nozzles for glass lined steel agitator vessels
DIN 28139-3-1985	搪瓷容器的焊接凸肩.分離式搭接法蘭連接用S形接管嘴.連接尺寸	Welding necks for glass lined vessels; form S nozzles for lapped divided flange connections; connecting dimensions
DIN 28151-1999	鋼制搪玻璃攪拌容器用套管噴嘴.噴嘴位置	Nozzles of jacket on agitated vessels, of glass lined steel - Position of nozzles
DIN 29736-2-1989	航空航天.燃料噴嘴接地插頭和插座.技術規范	Aerospace; fuel nozzle grounding plugs and sockets; technical specification
DIN 3404-1988	扁平注油嘴	Lubricating nipples; button head
DIN 3405-1986	杯形潤滑油嘴	Lubricating nipples cupped type
DIN 3410-1974	潤滑油排出管嘴.總尺寸和裝配尺寸	Lubricating nipples; overall and fitting dimensions
DIN 3528-1986	煤氣裝置用閥門.帶密封墊的噴嘴	Valves for gas installations; nozzles with gasket
DIN 45635-25-1980	機器排放的空氣傳播噪聲的測量.第25部分:包洛面法.氣焊及等離子焊噴嘴和機器	Measurement of airborne noise emitted by machines; enveloping surface method, oxy-fuel gas and plasma torches and machines
DIN 4661-4-1968	壓縮氣瓶.第4部分:焊接鋼氣瓶噴嘴	Gas cylinders, welded steel gas cylinders; nozzles
DIN 5042-7-1988	燃氣燈和煤氣燈.第7部分:固定噴嘴	Combustion lamps and gas luminaires; fixed nozzles
DIN 5059-1-1992	包裝.金屬和塑料管.金屬管.管嘴、管肩	Packaging; metal and plastic tubes; metal tubes; tube nozzles, tube shoulders
DIN 5059-2-1990	包裝.金屬和塑料管.塑料管.管嘴	Packaging; metal and plastic tubes; plastic tubes; tube nozzles
DIN 71412-1987	錐形潤滑劑注油嘴	Lubricating nipples; cone type
DIN 73372-1978	規格T and U 噴油嘴	Fuel injection nozzles, size T and U
DIN 7584-1980	家用安裝水管配件.壓力為10巴的平密封墊帶外螺紋的鋼管接管嘴	Water-fittings for house installation; steal tube nozzles with external thread, flat sealing up to working pressure of 10 bar
DIN 7588-1994	家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶內螺紋,另一端帶鋼管噴嘴、銅管噴嘴或套管	Water-fittings for house installation; boltings with flat seal; one side threaded coupling with inside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
DIN 7589-1994	家裝設備用水管配件.平密封螺旋接頭.壓力10巴的一端帶外螺紋,另一端帶鋼管噴嘴、銅管噴嘴和套管	Water-fittings for house installation; boltings with flat seal; one side threaded coupling with outside-thread, on the other side steel tube nozzle, copper tube nozzle or sleeve PN 10
DIN 7592-1981	家用安裝水管配件.標稱工作壓力為10巴以下的銅管管嘴	Water-fittings for house installation; copper tube nozzles up to working pressure of 10 bar
DIN 8535-1970	氣動工具.螺紋管嘴	Pneumatic tools, screw nozzle tips
DIN 8536-1970	氣動工具.轉接管嘴	Pneumatic tools; transition nozzle tips
DIN 8537-1970	氣動工具.錐形噴氣管嘴、連接螺母、連接管	Pneumatic tools; cone nozzle tips, connection nuts, connection nipples
DIN EN 12094-7-2005	固定式消防系統.氣體滅火系統用元件.第7部分:CO2系統用噴嘴的要求和試驗方法	Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO<(Index)2> systems; German version EN 12094-7:2000 + A1:2005
DIN EN 13079-2003	防飲用水回流污染的裝置.有噴嘴的氣隙.A系列D型	Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A; Type D; German version EN 13079:2003
DIN EN 13760-2003	輕型和重型車輛用汽車液化石油氣灌充設備.噴嘴的試驗要求和尺寸	Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions; German version EN 13760:2003
DIN EN 14979-2006	包裝.軟塑料/金屬層壓管.S13噴嘴的尺寸和公差	Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13; German version EN 14979:2006
DIN EN 293-1992	油壓噴霧器噴嘴.好低要求.試驗	Oil pressure atomizing nozzles; minimum requirements, testing; german version EN 293:1992
DIN EN ISO 5167-3-2004	用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003); German version EN ISO 5167-3:2003
DIN EN ISO 9300-2005	用文杜利臨界流量噴嘴測量氣體流量	Measurement of gas flow by means of critical flow Venturi nozzles (ISO 9300:2005); German version EN ISO 9300:2005
DIN ISO 14710-1999	農用機械和拖拉機.作物保護設備.空氣輔助的噴灑器.噴嘴旋轉螺母的尺寸	Agricultural machinery and tractors - Equipment for crop protection - Air-assisted sprayers; dimensions of nozzle swivel-nuts (ISO 14710:1996)
DIN ISO 2698-1995	柴油發動機.夾緊式燃油噴嘴.7 型和 28 型; 等同采用 ISO 2698:1993	Diesel engines - Clamp-mounted fuel injectors, types 7 and 28; identical with ISO 2698:1993
DIN ISO 4010-1978	道路車輛.延遲針閥式標定噴嘴	Calibrating Nozzle, Delay Pintle Type
DIN ISO 413-1987	航空航天.潤滑油加油管嘴頭	Aircraft; heads of lubricating nipples; identical with ISO 413, edition 1974
DIN ISO 5682-1-1999	農用機械和拖拉機.農作物防護設備.第1部分:噴灑器噴嘴的試驗方法	Agricultural machinery and tractors - Equipment for crop protection - Part 1: Test methods for sprayer nozzles (ISO 5682-1:1996)
DIN ISO 7026-1992	道路車輛.B類S規格的針式噴嘴用的20、21和27型螺絲擰入式噴嘴架	Road vehicles; screw-in injection nozzle holders types 20, 21 and 27 for pintle nozzle size "S", type "B"; identical with ISO 7026:1990
DIN ISO 7030-1988	道路車輛.12，13，14，15，16，17，18 和19 型螺旋擰入式噴嘴固定架	Road vehicles; screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19; identical with ISO 7030:1987
DIN ISO 8356-1985	道路車輛.柴油發動機.22型螺旋擰入式噴油嘴	Road vehicles; diesel engines; screw-in injector; type 22; identical with ISO 8356, edition 1984
DIN ISO 9102-1992	道路車輛.壓燃式發動機.24.25.26型螺絲擰入式噴嘴座	Road vehicles; compression-ignition engines; screw-in injection nozzle holders, types 24, 25 and 26; Identical with ISO 9102:1990
DIN ISO 9158-1989	道路車輛.無鉛汽油用管嘴	Road vehicles; nozzle spouts for unleaded gasoline; identical with ISO 9158:1988
DIN ISO 9159-1989	道路車輛.含鉛汽油和柴油用管嘴	Road vehicles; nozzle spouts for leaded gasoline and diesel fuel; identical with ISO 9159:1988
DIN V ENV 1259-2-1997	單噴嘴燃氣大大部輻射管加熱器和商用燃氣大大部發光輻射加熱器.第2部分:確定合理能耗的要求及試驗方法.輻射計法	Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters - Part 2: Requirements and test methods for establishing the rational use of energy; radiometric method B; German version ENV 1259-2:1996
DIN V ENV 1259-3-1997	單噴嘴燃氣大大部輻射管加熱器和商用燃氣大大部發光輻射加熱器.第3部分:確定合理能耗的要求及試驗方法.輻射計法	Single burner gas-fired overhead radiant tube heaters and non-domestic gas-fired overhead luminous radiant heaters - Part 3: Requirements and test methods for establishing the rational use of energy; radiometric method C; German version ENV 1259-3:1996
EN 12067-1-1998+A1-2003	燃氣噴嘴和燃氣裝置用燃氣/空氣混合調節器　第1部分：氣動型	Gas/air ratio controls for gas burners and gas burning appliances - Part 1: Pneumatic types
EN 12094-7-2000	固定式消防系統　氣體滅火系統的部件　第7部分：對CO2系統的噴嘴的要求及試驗方法	Fixed firefighting systems - Components for gas extinguishing systems - Part 7: Requirements and test methods for nozzles for CO<(Index)2> systems
EN 13012-2001	加油站加油機上使用的自動噴嘴的結構和性能	Petrol filling stations - Construction and performance of automatic nozzles for use on fuel dispensers
EN 13760-2003	輕型和重型機動車輛用液化石油氣填充系統 噴油嘴試驗要求和尺寸	Automative LPG filing system for light and heavy duty vehicles - Nozzle, test requirements and dimensions
EN 293-1992	油壓噴霧噴嘴好低要求測試	Oil pressure atomizing nozzles; minimum requirements; testing
EN 299-1998	油壓噴霧噴嘴角度和噴霧特性的測定	Oil pressure atomizing nozzles - Determination of the angle and spray characteristics
EN ISO 11545-2001	農業排灌設備　有噴嘴和噴霧嘴的橫向移動排灌機械和中心軸　分配水的均勻性的測定	Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2001)
EN ISO 15029-1-1999	石油和相關產品　難燃液體噴射燃燒特性的測定　第1部分：噴流燃燒持久度　空錐噴嘴法	Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method (ISO 15029-1:1999)
EN ISO 5167-1-2003	用壓差裝置測量流體流量　第1部分：圓截面管道中插入的節流孔板、噴嘴和文杜利管	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003)
EN ISO 5167-3-2003	圓截面管道中用壓差裝置測量流體流量　第3部分：噴嘴和文杜利噴嘴	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003)
EN ISO 9300-1995	用文杜利臨界流量噴嘴測定氣體流量	Measurement of gas flow means of critical flow Venturi nozzles (ISO 9300:1990)
GB 796-1989	鹵代烷滅火系統噴嘴性能要求和試驗方法	Halon fire extinguishing systems--Performance requirements and method of test for nozzles
GB/T 19230.3-2003	評價汽油清凈劑使用效果的試驗方法第3部分: 汽油清凈劑對電子孔式燃油噴嘴(PFI)堵塞傾向影響的試驗方法	Test method for evaluating gasoline detergent in use--Part 3: Test method for evaluating gasoline detergent produced effect forelectronic port fuel injector(PFI) fouling
GB/T 2624.3-2006	用安裝在圓形截面管道中的差壓裝置測量滿管流體流量第3部分：噴嘴和文丘里噴嘴	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
GB/T 5772-1986	柴油機噴油嘴偶件技術條件	Technical specification for fuel injection nozzles of diesel engines
HG/T 3144-1984	小容量內混式蒸汽霧化輕質油燒嘴	()
HG/T 3144-1984	小容量內混式蒸汽霧化輕質油燒嘴	()
HG/T 3168-1986	油噴嘴性能試驗方法	()
ISO 10626-1991	作物保護設備噴霧器卡口安裝的噴嘴連接尺寸	Equipment for crop protection; sprayers; connecting dimensions for nozzles with bayonet fixing
ISO 11545-2001	農業排灌設備有噴嘴和噴霧嘴的橫向移動排灌機械和中心軸分配水的均勻性的測定	Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution
ISO 14710-1996	作物保護設備空氣引射噴霧器噴嘴旋轉螺母的尺寸	Equipment for crop protection - Air-assisted sprayers - Dimensions of nozzle swivel nuts
ISO 15029-1-1999	石油和相關產品難燃液體噴射燃燒特性的測定第1部分:噴流燃燒持久度空錐噴嘴法	Petroleum and related products - Determination of spray ignition characteristics of fire-resistant fluids - Part 1: Spray flame persistence - Hollow-cone nozzle method
ISO 20844-2004	石油和相關產品.用柴油噴射器噴嘴測定含高聚物油的剪切穩定性	Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
ISO 2699-1994	柴油機法蘭安裝式“S”號噴油嘴 2、3、4、5和6型	Diesel engines; flange-mounted fuel injectors, size "S"; types 2, 3, 4, 5 and 6
ISO 413-1974	航空器潤滑油加油管嘴的頭部	Aircraft; Heads of lubricating nipples
ISO 46-1973	航空器燃油管嘴接地插頭和插座	Aircraft; Fuel nozzle grounding plugs and sockets
ISO 5167-1 Technical Corrigendum 1-1997	用壓差裝置測量流體流量第1部分:圓截面管道中插入的節流孔板、噴嘴和文杜利管技術勘誤1	Measurement of fluid flow by means of pressure differential devices - Part 1: Orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full - Technical Corrigendum 1
ISO 5167-3-2003	用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴	Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles
ISO 5176-1-1991	用壓差裝置測量流體流量.第1部分:圓截面管道中插入的節流孔板、噴嘴和文杜利管	Measurement of fluid flow by means of pressure differential devices; part 1: orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
ISO 5682-1-1996	作物保護設備噴霧設備第1部分:噴霧機噴嘴的試驗方法	Equipment for crop protection - Spraying equipment - Part 1: Test methods for sprayer nozzles
ISO 6182-9-2005	消防.自動噴水滅火系統.第9部分:水霧噴嘴的要求和試驗方法	Fire protection - Automatic sprinkler system - Part 9: Requirements and test methods for water mist nozzles
ISO 6392-2-1996	土方機械潤滑件第2部分:黃油槍噴嘴	Earth-moving machinery - Lubrication fittings - Part 2: Grease-gun nozzles
ISO 7026-1997	柴油機 S尺寸軸針式噴油嘴偶件B型擰入式噴嘴器件(20、21、21.1和27型)	Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B"
ISO 7026-1997	柴油機 S尺寸軸針式噴油嘴偶件B型擰入式噴嘴器件(20、21、21.1和27型)	Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size "S", type "B"
ISO 7030-1987	道路車輛 12、13、14、15、16、17、18和19型螺旋擰入式噴嘴器件	Road vehicles; Screw-mounted injection nozzle holders, types 12, 13, 14, 15, 16, 17, 18 and 19
ISO 7824-1986	造船及海上結構物潤滑油嘴錐型及平肩型	Shipbuilding and marine structures; Lubrication nipples; Cone and flat types
ISO 8169-1984	作物保護設備噴霧器噴嘴和壓力計的連接尺寸	Equipment for crop protection; Sprayers; Connecting dimensions for nozzles and manometers
ISO 9158-1988	道路車輛無鉛汽油用管嘴	Road vehicles; nozzle spouts for unleaded gasoline
ISO 9159-1988	道路車輛含鉛汽油和柴油用管嘴	Road vehicles; nozzle spouts for leaded gasoline and diesel fuel
ISO 9300-2005	用臨界流量文丘里噴嘴測定氣體流量	Measurement of gas flow by means of critical flow Venturi nozzles
ISO/TR 15377 Technical Corrigendum 1-1999	用壓差裝置測量流體流量符合ISO 5167-1規定的噴嘴和節流孔板規范指南技術勘誤1	Measurement of fluid flow by means of pressure-differential devices - Guidelines for the specification of nozzles and orifice plates beyond the scope of ISO 5167-1; Technical Corrigendum 1
ISO/TR 15377-1998	用壓差裝置測量流體流量符合ISO 5167-1規定的噴嘴和節流孔板規范指南	Measurement of fluid flow by means of pressure-differential devices - Guidelines for specification of nozzles and orifice plates beyond the scope of ISO 5167-1
JB/T 10645-2006	碳化硅特種制品氮化硅結合碳化硅燒嘴套	Special products of silicon carbide-Silicon nitride bonded silicon carbide-Nozzle tubes
JB/T 10645-2006	碳化硅特種制品氮化硅結合碳化硅燒嘴套	Special products of silicon carbide-Silicon nitride bonded silicon carbide-Nozzle tubes
JB/T 10697-2007	碳化硅特種制品反應燒結碳化硅　燒嘴套	()
JB/T 10697-2007	碳化硅特種制品反應燒結碳化硅　燒嘴套	()
JB/T 51184-2000	噴油嘴偶件可靠性考核評定方法、臺架試驗方法及失效判定	()
JB/T 5174-2005	噴油嘴偶件型式及連接尺寸	()
JB/T 7296-2004	柴油機噴油嘴偶件技術條件	()
JB/T 7297-2004	柴油機噴油嘴偶件性能試驗方法	()
JB/T 7661-2004	柴油機油泵油嘴產品清潔度限值及測定方法	()
JB/T 8604-1997	氣動小噴嘴式內徑測量裝置	()
JB/T 8650.4-1997	機床冷卻系統輔件噴嘴	()
JB/T 9729-1999	柴油機噴油泵柱塞偶件、出油閥偶件、噴油嘴偶件徑部密封值樣品技術條件	()
JB/T 9730-1999	柴油機噴油嘴偶件、噴油泵柱塞偶件、噴油泵出油閥偶件金相檢驗	()
JB/T 9732-1999	軸針式標準噴油嘴偶件	()
JB/T 9736-1999	噴油嘴偶件、柱塞偶件、出油閥偶件磁粉探傷方法	()
JC/T 1043-2007	水嘴鉛析出限量	Limit of lead extraction in faucets
JIS B1575-2000	油脂槍噴嘴グリースニップル	Grease nipples
JIS B1575 ERRATUM 1-2001	油脂槍噴嘴(勘誤1)	(Erratum 1)
JIS B9913-1972	消防用噴嘴連接件的分類及尺寸消防用ノズルチップの結合部の種類および寸法	Classification and dimensions of connections for fire department nozzle-tips
JIS D2502-1991	汽車用散熱器的壓蓋和接管嘴自動車用ラジエータのプレッシャキャップ及びフィラネック	Pressure caps and filler necks for automobile radiators
JIS D3604-1998	道路車輛.柴油發動機用燃油噴嘴的形狀及尺寸."S" 規格	Road vehicles -- Shapes and dimension of fuel injection nozzles for diesel engines -- Size "S"
JIS D3631-1998	道路車輛.柴油發動機用燃油噴嘴支架的形狀及尺寸."S" 規格	Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "S"
JIS D3632-1999	道路車輛.柴油機燃油噴嘴體的形狀和尺寸.規格P	Road vehicles -- Shapes and dimensions of fuel injection nozzle holders for diesel engines -- Size "P"
JIS D3636-2003	道路車輛.柴油機燃料噴射泵試驗.樞軸型校準噴嘴	Road vehicles -- Diesel fuel injection equipment testing -- Pintle type calibrating nozzle
JIS D3637-1-2003	道路車輛.柴油噴射設備試驗.第1部分:校準噴嘴和固定器組件	Road vehicles -- Diesel fuel injection equipment testing -- Part 1: Calibrating nozzle and holder assemblies
JIS Z8767-2006	用臨界流量文丘里噴嘴測定氣體流量	Measurement of gas flow by means of critical flow Venturi nozzles
MT/T 662-1997(2005)	滾筒采煤機噴霧降塵用噴嘴基本尺寸	()
NF E31-302-1976	流量小于或等于200kg/小時家用燃料油自動噴嘴	(Automatic sprayer burners for domestic fuel oil with a flow rate of up to 200 kg/H.)
NF E31-319-1992	油壓霧化噴嘴.好低要求.試驗	(OIL PRESSURE ATOMIZING NOZZLES. MINIMUM REQUIREMENTS. TESTING. (EUROPEAN STANDARD EN 293).)
NF E31-320-1999	油壓自動噴嘴.角度和噴射特性的測定(歐洲標準EN299)	(Oil pressure atomizing nozzles. Determination of the angle and spray characteristics.)
NF E31-354-1-1999	供暖鍋爐.第1部分:壓力送風噴嘴式供暖鍋爐.術語、一般要求、試驗和標志	(Heating boilers. Part 1 : heating boilers with forced draught burners. Terminology, general requirements, testing and marking.)
NF L94-111-1975	飛機地面注油管噴嘴的插頭和插座	(Aircraft . Fuel nozzle grounding plugs and sockets.)
NF R16-319-2003	道路車輛.B型、S規格軸針式噴油嘴用20、21、21.1和27型旋入式噴油嘴保持座	(Diesel engines - Screw-in injection nozzle holders, types 20, 21, 21.1 and 27 for pintle nozzle size “S“, type “B“.)
NF R16-331-1986	道路車輛.柴油發動機.22型螺栓固定的噴嘴	(ROAD VEHICLES. DIESEL ENGINES. SCREW-IN INJECTOR,TYPE 22.)
NF R16-332-1-1993	道路車輛.燃料噴射設備的試驗.第1部分:噴嘴檢驗及支架裝置	(Road vehicles. Fuel injection equipment testing. Part 1 : calibrating nozzle and holder assemblies.)
NF R16-335-1989	道路車輛.壓燃式發動機.擰入式噴嘴座,23型	(ROAD VEHICLES. COMPRESSION-IGNITION ENGINES. SCREW-IN INJECTION NOZZLE HOLDER,TYPE 23.)
NF R16-340-2003	柴油發動機.24、25和26和26.1型旋入式噴嘴保持座	(Diesel engines - Screw-in injection nozzle holders, types 24, 25, 26 and 26.1.)
NF S61-820-2001	消防和救援設備.消防用手控噴水嘴	(Firefighting and rescue service equipment - Hand-held nozzles for firefighting.)
NF S62-137-2001	固定式消防系統.氣體滅火系統用元件.第7部分:CO2系統噴嘴的要求和試驗方法	(Fixed firefighting systems - Components for gas extinguishing systems - Part 7 : requirements and test methods for nozzles for CO2 systems.)
NF T51-075-1986	塑料.燃燒特性.針狀噴嘴試驗	(Plastics. Fire behaviour. Needle burner test.)
NF T77-106-1987	工業硅樹脂.粘度、擠壓度（流動率）和ＣＡＳＳＯＮ粘度的測定.標準擠壓噴嘴法	(BASIC SILICONES FOR INDUSTRIAL USE. DETERMINATION OF EXTRUDABILITY (FLUIDITY) AND OF VISCOSITY “CASSON“. METHOD USING STANDARD EXTRUSION NOZZLE.)
NF U26-132-1985	植物保護裝置.農藥噴灑機具.噴霧器.噴嘴和壓力計的連接尺寸	(EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTING DIMENSIONS FOR NOZZLES AND MANOMETERS.)
NF U26-134-1992	農作物保護設備.噴霧機械.卡口固定噴嘴連接尺寸	(EQUIPMENT FOR CROP PROTECTION. SPRAYERS. CONNECTING DIMENSIONS FOR NOZZLES WITH BAYONET FIXING.)
NF U26-136-1997	作物保護設備.空氣噴霧機械.噴嘴旋轉螺母的尺寸	(EQUIPMENT FOR CROP PROTECTION. AIR-ASSISTED SPRAYERS. DIMENSIONS OF NOZZLE SWIVEL NUTS.)
NF X10-102-3-2003	用插入圓截面管道中的壓差裝置測量流體流量.第3部分:噴嘴和文杜利噴嘴	(Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3 : nozzles and Venturi nozzles.)
QB 1334-2004	水嘴通用技術條件	()
QB 2806-2006	溫控水嘴	Thermostatic faucets
QB/T 3895-1999	旋塞式熱水嘴	Pluged hot-Water taps
SH/T 0103-2007	含聚合物油剪切安定性的測定柴油噴嘴法	Standard test method for shear stability of polymer containing fluids using a european diesel injector apparatus
SH/T 0764-2005	柴油機噴嘴結焦試驗方法（XUD-9法）	()
SY/T 5906-2003	配水嘴嘴損曲線圖版制作方法	()
UL 2351-2000	防火設施用噴嘴	(Spray nozzles for fire-protection service )
YB/T 4087-1982(2005)	冶金噴嘴	()
prEN 12067-2-2001	燃氣噴嘴和燃氣裝置用燃氣/空氣混合調節器　第2部分：電子型	Gas/air ratio controls for gas burners and gas burning appliances - Part 2: Electronic types
prEN 12881-1-1997	傳輸帶燃燒模擬法可燃性試驗第1部分：兩米單噴嘴丙烷坑道試驗	Conveyor belts - Fire simulation flammability testing - Part 1: Two metre single burner propane gallery test
prEN 3908-1999	航空航天系列　鈍化耐腐蝕鋼潤滑軸向噴嘴	Aerospace series - Nipples, lubricating, axial type, in corrosion resisting steel, passivated
prEN ISO 20844-2002	石油及石油產品　用柴油機噴嘴測定含聚合物油類的剪切穩定性	Petroleum and related products - Determination of the shear stability of polymer-containing oils using a diesel injector nozzle (ISO/DIS 20844:2002)

【總述】：噴嘴，噴頭，水嘴國標標準參照表是節能環保產品，由北京科豐佳華公司專業開發相關產品有噴嘴,噴頭,水嘴,國標,標準,參照,表,編號,中文,，專業于噴嘴,噴頭,水嘴,國標,標準,參照,表,編號,中文,領域，能夠實現噴霧自動化、手機APP遠程控制，定制開發各類噴霧系統裝置；擁有完善的售后服務隊伍能為您的的需求提供專業的解決方案，提供全國安裝服務。
咨詢熱線：1500-1200-355\1352-1969-577 官方QQ:820800938 版權所有:北京科豐佳華環保設備有限公司，轉載請注明。
轉載請注明出處，本文鏈接： http://bjjlxs.com/News/70.html
電話-2.jpg